Steel Non-Drive Hub with (4) 3/8" Mounting Bolts on a 3-1/2" Bolt Hole Circle. (90mm Bolt Hole Circle) Offset Hub Length 2-1/2". Mounting Hardware: Nuts and Washers included. Has replaceable 3/4" x 1-3/8" Bearings installed. These hubs are great for go karts that have really short spindles on the front or short stub axles on the rear. If your machine uses 5/8" Bearings, you can remove the 3/4" x 1-3/8" Bearings and install 5/8" x 1-3/8" Bearings. They're sold on the top of our Bearings Page. Fits the 8002, 8004 and 8005 Rims.

  
| No reviews for this product.