150cc Go Kart Parts

GY6 150cc Engine Parts

GY6 150cc Engine Parts. 150cc Air Filters and Oil Filters, 150cc Starters, Solenoids, Voltage Regulators, CDI, Ignition Coils and more. Parts for 150cc Go Karts.

Carburetor for GY6 150cc, 125cc, 152QMI and 157QMJ
SKU	Description	Price	Purchase
115513	150CC CARBURETOR GY6	49.95
26mm Intake Manifold. 43mm Air Box Manifold.

Complete 150cc Carburetor: Fits most 150cc Chinese Go Karts. Most carburetors being offered are EPA carburetors that are not adjustable. This carburetor is adjustable with an exposed mixture screw to lean or rich the fuel mixture. This replacement Carburetor is not adjusted for your engine. It will need to have the air/fuel mixture screw and idle screwed adjusted to "tune" the Carb for your engine. Your Go-Kart or Light Utility Vehicle may use a manual choke. If so, you will need to remove the auto choke. Adjustable for easier access to the jets. Electric Auto Bystarter Choke.

The 150cc Carburetor will fit all the 150cc Hammerhead Go Karts and older Twister Hammerhead TJ Power Sport Models, TrailMaster Go Karts, Yerf-Dog Go Karts, Carter Brothers Talon Go Karts, SunL, Massimo, Roketta, American Sportworks Go Karts, Crossfire Go Karts, Blade Go Karts, BV Powersports Go Karts and many more.

Replaces OEM: American SportWorks Part #14925, Hammerhead Part #6.000.024, TJ Power Sports Part #16100-KAT-913-1, TJ Power Sports #16100-KAT-913, Carter Brothers Part #513-3003, Maxxam 150 Part #5133003, Metal Motorsports Part #MT07-039 and Metal Motorsports Part #KT07-039.

Designed for 125cc-150cc GY6 Street Scooters, ATV's, Go Karts and Dirt Bikes with 24mm intake and electric choke. Also used on products by Baja Motorsports, Chuanl, Geely, Kymco USA, Peace, Rocketa, Strada, Tank and Vento. Fits Models; Alphasport 150, Baja Dune 150, 2005 Barron Retro 150, Chuanl LB150T-12, KYMCO Agility 125, KYMCO People 150, KYMCO People S125, KYMCO Super 8 150, Peace 150, Schwinn Graduate 150 and Zhong Neng 150T-7C.

150cc Carburetor Dimensions: Overall Depth: 11cm, Overall Width: 10cm, Overall Height: 14.5cm, Connector: 2 pin, Connector Wire Length: 68cm, Fuel Line Length: 28cm +/-, Fuel Line Inner Diameter: 4.5mm, Fuel Line Outer Diameter: 7.5mm, Main Vacuum Hose Length: 18cm +/-, Vacuum Hose with T Length: 19cm +/-, Vacuum Hose Inner Diameter: 4mm, Vacuum Hose Outer Diameter: 7mm, Drain: Yes, Fuel Shutoff: No.

Retrofit Manual Choke Kit
SKU	Description	Price	Purchase
15563	MANUAL CHOKE KIT	58.50
15563 Retrofit Manual Choke Kit. Genuine American Sportworks 15563 Carburetor Auto Choke Kit. Electric Choke used on 150cc Engines. Only for use on DENI Carburetors. Will not work on Keihin Carburetors. This kit subs for discontinued item # 14563. This kit is applicable for a 150cc Fun Kart. For 150cc Light Utility Vehicles use Part # 15439.

150cc Carburetor Gasket
SKU	Description	Price	Purchase
14256	GY6 CARBURETOR GASKET	3.50
Genuine American Sportworks 14256 Gasket. 150cc Intake Manifold Insulator Gasket. Replaces Trailmaster 152.12.307, Hammerhead M150-1001004, Carter Brothers 513-1002 and others. 150cc Carburetor Gasket.

150cc GY6 Cylinder Kit
SKU	Description	Price	Purchase
115650	150CC REBUILD KIT COMPLETE	89.50
150cc Rebuild Kit. Complete Kit to Rebuild a 150cc Top End. Includes 150cc Cylinder Head, Cylinder, Piston, Piston Rings, Piston Pin and Gaskets. GY6 150cc Engine Rebuild Kit for 150cc Go Kart Engines.

150cc Choke Bystarter
SKU	Description	Price	Purchase
115514	CHOKE BYSTARTER ASSY	14.50
150cc Electric Choke Bystarter. Used on all Chinese 150cc Carburetors. Replaces Trailmaster 13563, Hammerhead 16046-KAT-909, Carter Brothers 513-10644 and American Sportworks 14563.

150cc Fuel Valve Petcock
SKU	Description	Price	Purchase
115515	FUEL VALVE PETCOCK	9.95
150cc Fuel Valve Petcock used on all 150cc Hammerhead, Trailmaster, American Sportworks and many others. Fits American Sportworks Model 6150, 6151, 6152, 7150 and Carter Brothers Talon 150. Mounts under the fuel tank and is used on nearly all brands of 150cc Go Karts across the board, including SUNL. Replaces Hammerhead 6.000.046, Old TJ Power Sports 6.000.012, Metal Motorsports MT07-013, Kinroad KA002080000 and Carter 540-3003. Fits 16mm nipples on fuel tank. Vacuum operated.

150cc Air Filter
SKU	Description	Price	Purchase
115516	AFM AIR FILTER 150CC	14.50
5-1/4" Tall, 1-7/8" Center Hole. Used on all 150cc American Sportworks Go Karts, Trailmaster Go Karts and Hammerhead Go Karts. Also used on Trailmaster 300cc Go Karts and Gio Bikes. Replaces American Sportworks 14194, Carter Brothers Talon 513-3021, Trailmaster 6.000.151. Some Carter Brothers Karts use a similar filter with 2-1/4" Hole, which is now obsolete.

Air Filter Assy for 150cc American Sportworks
SKU	Description	Price	Purchase
115517	AIR FILTER ASSY FOR 150CC	29.95
150cc Air Filter Assembly. Designed to mount on American Sportworks 150cc Engines ONLY. Replaces the Discontinued American Sportworks 14192. Includes the Air Filter Box, the Air Hose from the Air Box to the Carb and the Air Filter.

HF-183 Oil Filter for Models Equipped with an Oil Cooler
SKU	Description	Price	Purchase
14514	150CC OIL FILTER	19.95
6.000.218	150cc OIL FILTER	19.95
Hiflo-HF183 Oil Filter. 150cc Oil Filter used on all 150cc Go Karts with an Oil Cooler. Hammerhead 6.000.218 - American Sportworks 14514 - American Landmaster 14514 - Polaris 3023344. Hammerhead GT and Standard Models do not use oil filters. This filter will not fit Carter Brothers Go Karts. The 14514 is a Genuine American Sportworks Part. The 6.000.218 is a Hammerhead Part Number. These two filters are exactly the same.

150cc Starter Assembly
SKU	Description	Price	Purchase
115518	150CC STARTER ASSY	39.95
150cc Starter with an 18-1/2" long wire. Fits most 150cc Go Karts including: American Sportworks Carbide and Quantum Model 6150 and 7150, Carter Brothers Talon GSR150 R2 and GSX150 R2, Trailmaster, every 150cc Hammerhead, SUNL, Massimo, Kandi, Roketta, KinRoad, Joyner, BMS, Gio Bikes and more. Replaces Trailmaster 152.07.500, Hammerhead M150-1064000, Kinroad EN3-0015, ACE Sports Maxxam 150 2R Part #513-1059, American Sportworks 14373 and Carter Brothers 513-1059.

150cc Ignition Coil
SKU	Description	Price	Purchase
14227	IGNITION COIL	24.50
Genuine 20" American Sportworks 14227 Ignition Coil. Used on all 150cc Go Karts. Includes the Spark Plug Wire and the Boot/Cap. Replaces Carter Brothers 609-0010, Trailmaster 6.000.025 and 6.000.125, Hammerhead 6.000.126 and many others.

DC 150cc CDI
SKU	Description	Price	Purchase
115520	CDI FOR 150CC ENGINES	19.50
Direct Current (DC) CDI. Size: 1-15/16" wide x 2-7/8" long. Fits American Sportworks 150cc Model 6150, 6151, 6152, 7150 and 200 Series LUV's. Used on Hammerhead 150GT, 150GTS and 150SS models as well as all 150cc Trailmaster Go Karts. Replaces American Sportworks 14226, American Landmaster 14226, Hammerhead 6.000.267 and Trailmaster 6.000.125-BV.

AC 150cc CDI
SKU	Description	Price	Purchase
115519	150CC CDI ASW	19.50
Alternating Current (AC) CDI. Size: Small 1.5" wide x 2.5" long. AC CDI's are for Pull Start Models that get their power directly from the Alternator. Fits many older 150cc Hammerhead models such as the Junior and Standard Hammerhead Go Karts, Metal Motorsports Go Karts, most SUNL and Carter Brothers 150cc Go Karts. Same as Hammerhead Part # 6.000.125, Hammerhead MT07-027, Metal Motorsports KT07-027, DongFang 01020016 and Old TJ Power Sports 6.000.037. AC CDI Fits Carter Brother Go Karts and early 150cc Hammerhead Go Karts.

Ignition Switch 3 Wire Pigtail Key Switch
SKU	Description	Price	Purchase
14222	IGNITION SWITCH W/KEY	39.50
Genuine American Sportworks 14222. Fits American Sportworks 150cc Model 6150, 6151, 6152, 7150 and all 200 Series LUTV's, Trailmaster 150cc and 300cc Go Karts, Hammerhead SS150, New-Style GTS150 with internal reverse and the GTS250. Old TJ Power Sports 6.000.219, Hammerhead 6.000.158, Carter Brothers 509-3029. Keys included.

150cc Voltage Regulator
SKU	Description	Price	Purchase
115521	VOLTAGE REGULATOR	24.50
This Part Charges the Battery. It plugs into the Wiring Harness and Electric Choke. Fits American Sportworks Model 6150, 6151 and 7150 Go Karts. All Hammerhead 150cc Models and most American Sportworks 150cc Go Karts. This will NOT work for the LM200 or R-150. Depending on what 150cc model you have, you might need to mount the regulator on the outside of the electric box. Replaces Hammerhead Part # 6.000.124-GTS, Old TJ Power Sports 6.000.124, Old TJ Power Sports 6.000.036 and TJPS 6.000.124-STD.

150cc Voltage Regulator
SKU	Description	Price	Purchase
115524	150CC REGULATOR HAMMERHEAD TR	29.95
150cc Voltage Regulator used on 150cc Trailmaster and Hammerhead Go Karts, except for Hammerhead GT and GTS Models. Also used on 150cc Carter Brothers Go Karts and many other Chinese Go Karts. Hammerhead GT and GTS models use Regulator Part #115521 or 14224.

Starter Relay Solenoid American Sportworks 14225
SKU	Description	Price	Purchase
115525	150CC STARTER RELAY	11.50
Starter Relay Solenoid for All 150cc American Sportworks Go Karts. Starter Relay Solenoid for 150cc to 300cc Go Karts. Used on American Sportworks Go Karts, Carter Brothers, Trailmaster and all Hammerhead 150cc and 250cc Go Karts (except GT250). 150cc American Sportworks Part #14225, 150ccc Trailmaster Part #6.000.035, 300cc Trailmaster Part #6.000.256, Carter Part #509-1008, and many others. Rubber mount slips onto flat post welded to frame.

Starter Relay Solenoid
SKU	Description	Price	Purchase
115522	STARTER RELAY SOLENOID FOR 150	11.50
Starter Relay Solenoid for 12 Volt Electric Start 150cc Go Karts. Small Male Blade Connector. Will NOT fit American Sportworks Go Karts.

8 Leg Magneto with Stator
SKU	Description	Price	Purchase
115523	8 LEG MAGNETO WITH STATOR	21.50
This 150cc 8 Leg Magneto with Stator (Pick Up Coil) is used on 150cc Trailmaster, Hammerhead, American Sportworks Model 6150, 6151, 6152, 7150, 7151 Go Karts and 200 Series Light Utility Vehicles 2010 and earlier. 2011 Go Karts and newer use Part #15120. These are not interchangable. Trailmaster Part # 152.07.102, American Sportworks 14365, Hammerhead M150-1051200.