www.gokartsupply.com



Go Kart Cables Mini Bike Cables

Go Kart Throttle Cables - Brake Cables

Throttle Cables
Universal Throttle Cables
SKU
Description
Price
Purchase
04-261
CABLE - THROTTLE 48 INCH
6.50

04-262
CABLE - THROTTLE 53 INCH
6.50

04-263
CABLE - THROTTLE 60 INCH
7.50

04-269
CABLE - THROTTLE 100 INCH
13.50

Innerwire length shown above.
Ball on one end - Barrel on the other.
The barrel can be cut off with a sharp tool.
Straight End Cables
Universal Throttle Cables
SKU
Description
Price
Purchase
KMTC92
CABLE - THROTTLE 92 INCH
12.50

KMTC120
CABLE - THROTTLE 120 INCH
15.50

Ball on one end - Straight wire on the other.
Tecumseh Wire Stops
Tecumseh Wire Stop
SKU
Description
Price
Purchase
2361
TECUMSEH CABLE STOP
3.50

Custom Tecumseh Wire Stop
1/4"OD, 8/32" ID, length .240
Swivel Wire Stop
Universal Wire Stop
SKU
Description
Price
Purchase
04-267
WIRE STOP-SWIVEL
2.00

This universal wire stop is used on throttle cables and brake cables. Fits Throttle Cable 04-261, 04-262, 04-263, 04-269 and Brake Cable 04-264.
Round Wire Stop
Round Wire Stop
SKU
Description
Price
Purchase
04-219
WIRE STOP-ROUND
2.00

This universal wire stop is used on throttle cables and brake cables. Fits Throttle Cable 04-261, 04-262, 04-263, 04-269 and Brake Cable 04-264.
Conduit Clip
Briggs Conduit Clip
SKU
Description
Price
Purchase
03-250
BRIGGS C0NDUIT CLIP
2.50

Fits Briggs and Stratton Engines.
Used to clamp the cable to the engine.
Clamps
Clips for Holding
Conduit to the Frame
SKU
Description
Price
Purchase
03-252
CONDUIT CLIP FOR 7/8" TUBING
2.00

03-251
CONDUIT CLIP FOR 3/4" TUBING
2.00

Holds conduit to 7/8" or 3/4" tubing.
Manco Cables
Manco Throttle Cables
SKU
Description
Price
Purchase
8252
THROTTLE CABLE 60 IN
22.50

8251
THROTTLE CABLE 74.5 IN
24.50

8173
THROTTLE CABLE 90" MANCO
28.50

The innerwire length is shown above.
Eyelet on one end, straight wire on the other.


8251, 8252, 8173 Cable
Installation Instructions

Manco Throttle Cable Installation Instructions

Fully loosen the jam nuts (1 and 2) and mount the cable housing to the frame.

Make sure the throttle pedal is against the rear pedal stop (3).

Pull the throttle cable housing toward the rear of the kart until you feel resistance.

Warning: DO NOT pull the throttle cable housing any further.

Hold the cable housing in this position and screw the front jam nut (2) against the frame.

Warning: Pulling the housing past the first point of resistance will engage the engine throttle while the throttle pedal is in the idle position. Upon starting the engine, the vehicle may accelerate.

Screw the rear jam nut (1) against the frame. Tighten the front jam nut (2) securely.

Make sure the engine throttle linkage is in the idle position and the throttle pedal is against the rear stop.

Block the rear end of the kart up off the ground and start the engine. If the engine is not at idle speed, stop the engine and repeat the above procedures.

Warning: The engine must be at idle speed when the throttle pedal is in the rear position. Failure to adjust the throttle properly may result in personal injury and/or vehicle damage. If you are unable to properly adjust the throttle, contact a dealer for assistance.

Make sure the exposed end of the throttle cable does not interfere with throttle mechanism and the cable end does not come in contact with engine ground terminal.

Inspection: The throttle cable housing may need to be adjusted periodically because the cable stretches. When fully depressing the throttle pedal no longer activates full engine speed, adjust the throttle cable housing.

Manco 11525 Cable
Manco Mini Bike
Factory Throttle Cable
SKU
Description
Price
Purchase
11525
THROTTLE CABLE 56.25 INCHES
19.50

Fits Model 594, 595 and 596 Mini Bikes.


Yerf Dog Cable
Yerf Dog Throttle Cable
SKU
Description
Price
Purchase
YDTC40
THROTTLE CABLE 40" YERF DOG
26.50

40" cables with an "eyelet" on one end and a small barrel on the other. These cables are for American Style Yerf Dog Go Karts with Tecumseh Engines.
Cable 14094
American Sportworks
14094 Throttle Cable
SKU
Description
Price
Purchase
14094
THROTTLE CABLE ASW
24.50

Genuine American Sportworks 14094. 77" Long Throttle Cable. Fits American Sportworks Model 6150, 6151, 6152 and 7150. Replaces Hammerhead 6.000.034, TrailMaster 6.000.232, Carter Brothers 630-0001 and many other 150cc and 250cc Go Karts.
Park Cable 14095
American Sportworks
14095 Parking Brake Cable
SKU
Description
Price
Purchase
14095
CABLE, PARK BRAKE
22.50

57" Long Cable. American Sportworks 14095 Cable, Park Brake. American Landmaster 14095 Parking Brake Cable. Replaces Trailmaster and Hammerhead Part Number 6.000.050 and Carter Brothers 552-1000.
Cable ASW 14609
American Sportworks
14609 Throttle Cable
SKU
Description
Price
Purchase
14609
THROTTLE CABLE
18.50

Genuine American Sportworks 14609. 72-1/4" Long Overall, Outercasing 62". Fits American Sportworks Model 3170B-09 Hornet, 3170B-11 Dragonfly, 3171B-15 Quicksilver, 3171B-09 Black Widow, 3171B-25 Black Widow and 4170 Vector Go Karts.
Shift Cable 14456
American Sportworks
14456 Shift Cable
SKU
Description
Price
Purchase
14456
SHIFT CABLE D/N/R ASW
18.50

Genuine American Sportworks 14456 Shift Cable. Forward/Reverse Cable. Used on all American Sportworks 150cc Go Karts and Light Utility Vehicles: 2 Per. Price is each shift cable. 62" Shifter Cable for 150cc-300cc Go Karts with Internal Reverse. F/N/R Cable for Mudhead 208R. Trailmaster 150cc Part #60130-300G, Trailmaster 300cc Part #40010-300GK.
2-11053 Choke Cable
American Sportworks
2-11053, 60" Choke Cable
SKU
Description
Price
Purchase
2-11053
CHOKE CABLE, 60IN
19.50

CABLE 6.000.040
8mm, 61" Reverse Cable
for 150cc and 250cc Karts
SKU
Description
Price
Purchase
6.000.040
150cc reverse cable
28.50

For Go Karts Equipped with an External Reverse Box. 61" Reverse Cable with a ball on both ends. This Reverse Cable fits Hammerhead Junior, SS150, Standard 150, GTS150 and 250GT, Carter Brothers Talon Model GSR 150 R and Talon GSX 150 R Go Karts. Replaces Carter Brothers Part #539-1000, Hammerhead Part #6.000.040, TJ Power Sports #12.000.040 & ACE Sports Maxxam #539-1000. Also used on Twister 150cc, 250cc, Dazon, Baja, Raptor and Kasea Model LM150IIR and AB150 Go Karts. If your go kart has an Internal Reverse with F/N/R gears this reverse cable will NOT work. In addition, the F/N/R karts also require two reverse cables.


5hp Briggs Cable Installation
BS Throttle Linkage
Briggs and Stratton
Throttle Linkage Kit
SKU
Description
Price
Purchase
692316
THROTTLE LINKAGE KIT 5HP
24.50

This Briggs and Stratton Throttle Linkage Kit contains the following parts as shown above: #5926, 5927, 5928, 5929 and 5931. Manco Cable Retainer Part #1628 is part of the cable.


Throttle Cable To Engine
Briggs Throttle Linkage Kit


Pass the throttle cable through the cable retainer and butt the throttle cable housing end against the inside shoulder of the cable retainer.

The cable retainer is to be securely fastened to the engine with the clamping screw.

Pass the end of the cable through the hole in the cable stop.

Before tightening the cable stop screw ...

Ensure the spring anchor, spring & cable are installed as illustrated.

Ensure the throttle pedal is in the rearward (idle) position.

Ensure there's no slack in the cable with no tension applied to the return spring.

Ensure the housing is inside and against the cable retainer.

Note: The part numbers on the illustration above were used by Manco, these are not Briggs and Stratton part numbers.

Clone Throttle Kit
Cable Attachment Kit
For Honda & Clone Engines
SKU
Description
Price
Purchase
G20180
TH CABLE ATTACHMENT KIT CLONE
10.50

Attaches Go Kart Throttle Cables or Mini
Bike Throttle Cables to a Honda or Clone Engine.
Shown with air cleaner assy removed.


Universal Brake Cables

Universal Brake Cabl
Heavy Duty
5/64 Brake Cables
SKU
Description
Price
Purchase
1753
BRAKE CABLE 56"
12.50

04-264
CABLE - BRAKE 60"
12.50

.370 Barrel on one end
and a straight wire on the other.
Disc Brake Cable
Universal Brake Cables
SKU
Description
Price
Purchase
260-190
34" DISC BRAKE CABLE
16.50

04-266
56" DISC BRAKE CABLE
16.50

For Internal Expanding and Disc Brakes.


Make Custom Brake Cables

Heavy Duty 1x19 Wire and Premium Casing


Wescon 1x19 Cable
Wescon Cable Wire
This is the Innerwire Only
SKU
Description
Price
Purchase
2303
WESCON CABLE 84" 5/64"
10.50

2331
WESCON CABLE 68" 3/32
10.50

1x19 Type Galvanized Wescon Cable Wire with a Swaged Ball. Used to make heavy duty cables. Cable Wire Only, not a complete cable. Poly-Lined Wescon Conduit Outer Casing available below. 5/64 Wire uses 1/4 Conduit. 3/32 Wire uses 9/32 Conduit.


Wescon Conduit
Wescon Conduit
This is the Outer Casing
SKU
Description
Price
Purchase
2315-78
1/4 CONDUIT 78 IN LONG
16.50

2322-66
9/32 CONDUIT 66 IN LONG
18.50

Wescon Conduit 'Outer Casing' is Poly-Lined for smooth cable travel. This is the Outer Casing Only. For use with 1 x 19 Cable Wire, sold above. 5/64 Wire uses 1/4 Conduit. 3/32 Wire uses 9/32 Conduit.
50 Feet Cable Wire
50 Feet of 5/64"
1x19 Cable Wire
SKU
Description
Price
Purchase
2342
50 FT WIRE 5/64 1x19 TYPE
32.50

1 Strand on 19 Wires -
Less flexible but stronger than 7x7 wire.
50 Feet 1/4 Conduit
50 Feet of 1/4" Conduit
Poly-Lined Outer Casing
SKU
Description
Price
Purchase
2315
50 FOOT ROLL 1/4 CONDUIT
69.50

1/4" OD Conduit, .278 Cover OD, For 5/64" Cable Wire. Poly-Lined Conduit allows for smoother cable operation and helps prevent corrosion between cable and sheathing.