www.gokartsupply.com



Go Kart Repair Tools

Mini Bike Repair Tools

Hour Meter
Tachometer and Hour Meter
SKU
Description
Price
Purchase
TACHOMETER
65.50

Records actual running of engine. Non-erasable. Shows engine RPM's up to 9,000 RPM. Alerts you to Lube (grease) and Change Oil (25 hour intervals). No battery required, it's triggered from the spark plug wire.

Fix-A-Thread Kits
Fix-A-Thread Repair Kits
SKU
Description
Price
Purchase
1/4-20 THREAD KIT
32.50

5/16-18 THREAD KIT
36.50

3/8-16 THREAD KIT
38.50

Common Inch Sizes with Inserts.
Chain Tool
Chain Breaker Tool
SKU
Description
Price
Purchase
4097
CHAIN BREAKER TOOL
29.50

Chain Breaker Tool. Fits 35 Pitch thru 60 Pitch Standard Roller Chain. For 3/8", 1/2" and 5/8" Pitch Roller Chain.
Chain Holder Tool
Roller Chain Holder Tool
SKU
Description
Price
Purchase
CHAIN HOLDER TOOL (PULLER)
26.50

Chain Holder Tool for use with #35 through #60 Chain and #420 Chain. Leaves both hands free to connect the chain. Time saving, handy tool to help install standard chain at the correct tension. 32-9071 Chain Tool.
Carb/Crank Gauge
Carburetor/Crankcase
Pressure Gauge Tools
SKU
Description
Price
Purchase
CARB/CRANKCASE PRESSURE GAUGE
86.50

Pumps up to 14 PSI.
Has both American and Metric scales.
Spark Tester
Ignition Spark Tester
SKU
Description
Price
Purchase
SPARK TESTER
26.50

Adjustable ignition spark tester works on ignition systems from high energy electronic automotive systems to small engines. Tests for no start conditions and for spark strength. Adjustable gap allows for different spark plug gap requirements of different ignition systems from 0 to 40,000 volts. Gauge background makes spark easy to see for accurate measurement. Alligator clip securely fastens to ground.

Ign./Spark Tester
Ignition Spark Plug Tester
SKU
Description
Price
Purchase
IGNITION PLUG TESTER
12.50

IGNITION TESTER
19.50

This tester checks the integrity of the electrical ignition and magneto/coil ignition systems of go kart engines, mini bike engines, lawnmower engines, boat motors, motorcycles and automobiles. The tester checks current and voltage and will indicate fouled electrodes. E-Z view LED and neon lamps for easy, accurate reading. Pocket size. High impact ABS plastic casing.

Spark Plug Gap Tool
Spark Plug Gap Gauge
SKU
Description
Price
Purchase
SPARK PLUG GAP GAUGE
7.50

With Electrode Adjusting Tool.
Thousand and Metric Equivalents.
Valve Seating Tool
Valve Seating Tool
SKU
Description
Price
Purchase
VALVE SEATING TOOL
9.50

Suction Cup Style, 5/16" and 1-1/16" Diameter Cups.
Valve Spring Compr
Valve Spring Compressor
SKU
Description
Price
Purchase
VALVE SPRING COMPRESSOR
36.50

The ideal tool for removing and replacing valve springs of B & S Engines. Long and slender, it is adapted to reach into small recesses in which valve springs and retaining washers are located. The arms are hinged so they're practically parallel at the jaws. The jaws are adjustable in width to fit the valve springs and have edges so thin that they can be easily forced under and over the ends of the valve spring to compress it.

Cylinder Hone
Cylinder Hone Tool
SKU
Description
Price
Purchase
CYLINDER HONE TOOL
36.50

Fits 1-1/2" to 3" Diameter Cylinders.
Ring Compressor
Ring Compressor Tool
SKU
Description
Price
Purchase
RING COMPRESSOR TOOL
19.50

For 1-1/2" to 3" Diameter Cylinders.
Ring Expander
Ring Expander Tool
SKU
Description
Price
Purchase
RING EXPANDER TOOL
26.50

For installing & removing piston rings without the danger of breakage or distortion. No adjustments needed. All rings expanded whether step-cut or diagonal cut. 2" to 4" capacity.

Spark Plug Wrench
Spark Plug Wrench
SKU
Description
Price
Purchase
SPARK PLUG WRENCH
4.50

Fits 13/16" Plus and 3/4" Plugs. Loosens or tightens spark plugs. It has a 13/16" wrench on one end, 3/4" on the other.

13/16
Spark Plug Wrench
SKU
Description
Price
Purchase
3/4" and 5/8" SPARK PLUG WRNCh
6.50

Fits 13/16" and 5/8" Plugs. For Overhead Valve Engines. Loosens or tightens spark plugs. It has a 13/16" wrench on one end, 5/8" on the other.

Valve Stem Tool
Valve Stem and Core Tool
SKU
Description
Price
Purchase
VALVE STEM/CORE TOOL
8.50

Used to remove and install valve stems and
cores in tubeless and tube type tires and wheels.
Safety Glasses
High Impact Safety Glasses
SKU
Description
Price
Purchase
SAFETY GLASSES
18.50

Clear lens with black padded frame. Durable frame features straight temples with detachable strap. Inner foam padding is flame resistant and provides excellent sealed protection from wind, dust and other debris. Sporty, lightweight design eliminates the bulkiness of a goggle. Anti-fog lens provide 99% protection against harmful UV rays. Meets ANSI Z87.1 High Impact Requirements.

Hearing Protector
Elvex Hearing Protector
SKU
Description
Price
Purchase
HEARING PROTECTOR
18.50

Noise Reduction Rating of 25 Decibels.