Grade 5 Hardware included. Innertubes Required
High Speed 5/8" X 1-3/8" Bearings Installed.
The following tires will fit the 8" Custom Rims:
480/400x8, 14x300x8 and 4.10x3.50x8

Grade 5 Hardware included. Innertubes Required
High Speed 5/8" X 1-3/8" Bearings Installed.
The following tires will fit the 6" Astro Wheels:
4.10x350-6, 410-6 and 13x400-6

Both wheels have four 3/8" bolts on a 2-7/8" bolt hole circle. This is the most
common bolt hole circle in the country. It uses the least expensive sprockets
& brake drum. All you have to do is install (1) flanged 1-3/8"OD wheel bearing
in each end, mount your tire and bolt the sprocket and brake drum on the hub
and you've got a drive wheel assembly. Use sprockets and brake drums with a
2-7/8" bolt hole circle ... compatible sprockets & brake drums are sold below.

2-1/8" center hole
Fits Drive Wheel Part #6DRW, Sold Above

These sprockets have two different sets of mounting holes. One set of four 3/8"
mounting holes on a 2-7/8" bolt hole circle and one set of four 5/16" mounting
holes on a 2-13/16" bolt hole circle. Fits Drive Wheel Part #6DRW, Sold Above

This steel brake drum has two different sets of mounting holes.
One set of four 3/8" mounting holes on a 2-7/8" bolt hole circle
and one set of four 5/16" mounting holes on a 2-13/16" bolt hole
circle. Use with a 4" brake band. Fits Drive Wheel Part #6DRW

The Part #1866 Fenders are for 6 and 8" Tires ---- 5.5" Maximum Width

Thick, sturdy mounting base, threaded inserts for a positive mount,
high quality covers. The threaded mounting holes in the rear are
3-1/2" apart center to center. The threaded mounting hole in the
front is 9-7/8" from the rear mounting holes. Now in Solid Black only.

Confirm The Handlebar Diameter Before Ordering.

Replacement Brake Lever for 7/8" handlebars, Includes Cable Adjuster.

5" Tall Universal Kickstand with Weld-On Bracket and Spring.