Manco Dingo Go Kart

WELCOME TO .... gokartsupply.com
checkered bar

We Accept

Go Kart Repair Tools

Mini Bike Repair Tools

Hour Meter

Tachometer and Hour Meter

SKU
Description
Price
Add to Cart
32-9359
TACHOMETER
62.50

Records actual running of engine. Non-erasable. Shows engine RPM's up to 9,000 RPM. Alerts you to Lube (grease) and Change Oil (25 hour intervals). No battery required, it's triggered from the spark plug wire.

Charging Sys.Tester

Charging System Tester

SKU
Description
Price
Add to Cart
32-9074
CHARGING SYSTEM TESTER
58.50

Checks battery condition and starting. 6 and 12 volt.

Battery Tender

1.25 amp Battery Tender
12 Volt Automatic Charger

SKU
Description
Price
Add to Cart
32-7829
BATTERY TENDER/CHARGER
89.50

This is a 1.25 amp battery charger that automatically switches from full charge to a floating charge mode and then monitors the battery. Designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. For lead acid and gel cell batteries only. 6 foot cord. Made in The USA.

Fix-A-Thread Kits

Fix-A-Thread Repair Kits

SKU
Description
Price
Add to Cart
32-2310
1/4-20 THREAD KIT
28.50

32-2311
5/16-18 THREAD KIT
30.00

32-2312
3/8-16 THREAD KIT
32.50

Common Inch Sizes with Inserts.

Azusa Chain Tool

Chain Breaker Tool

SKU
Description
Price
Add to Cart
4899
CHAIN BREAKER TOOL
36.50

For use with #35, 40, 41 and 420 chain.

Chain Tool

Chain Breaker Tool

SKU
Description
Price
Add to Cart
32-1733
CHAIN BREAKER LI
22.50

Fits 35 Pitch thru 60 Pitch Standard Roller Chain.

Chain Holder Tool

Roller Chain Holder Tool

SKU
Description
Price
Add to Cart
32-9071
CHAIN HOLDER TOOL (PULLER)
22.50

Carb/Crank Gauge

Carburetor/Crankcase
Pressure Gauge Tools

SKU
Description
Price
Add to Cart
32-8338
CARB/CRANKCASE PRESSURE GAUGE
86.50

Pumps up to 14 PSI.
Has both American and Metric scales.

Spark Tester

Ignition Spark Tester

SKU
Description
Price
Add to Cart
32-9773
SPARK TESTER
22.50

Adjustable ignition spark tester works on ignition systems from high energy electronic automotive systems to small engines. Tests for no start conditions and for spark strength. Adjustable gap allows for different spark plug gap requirements of different ignition systems from 0 to 40,000 volts. Gauge background makes spark easy to see for accurate measurement. Alligator clip securely fastens to ground.

Ign./Spark Tester

Ignition Spark Plug Tester

SKU
Description
Price
Add to Cart
32-7731
IGNITION PLUG TESTER
12.50

32-9099
IGNITION TESTER
19.50

This tester checks the integrity of the electrical ignition and magneto/coil ignition systems of go kart engines, mini bike engines, lawnmower engines, boat motors, motorcycles and automobiles. The tester checks current and voltage and will indicate fouled electrodes. E-Z view LED and neon lamps for easy, accurate reading. Pocket size. High impact ABS plastic casing.

Spark Plug Gap Tool

Spark Plug Gap Gauge

SKU
Description
Price
Add to Cart
32-1707
SPARK PLUG GAP GAUGE
7.50

With Electrode Adjusting Tool.
Thousand and Metric Equivalents.

Valve Seating Tool

Valve Seating Tool

SKU
Description
Price
Add to Cart
32-1731
VALVE SEATING TOOL
6.50

Suction Cup Style, 5/16" and 1-1/16" Diameter Cups.

Valve Spring Compre

Valve Spring Compressor

SKU
Description
Price
Add to Cart
32-1706
VALVE SPRING COMPRESSOR
10.50

Fits most fractional horse-power engines. Notched end compresses valve spring. Hook end aligns valve spring retainer. Remove and install valve springs on all engines using self-locking valve spring retainers.

Valve Spring Compr

Valve Spring Compressor

SKU
Description
Price
Add to Cart
32-9054
VALVE SPRING COMPRESSOR
28.50

The ideal tool for removing and replacing valve springs of B & S Engines. Long and slender, it is adapted to reach into small recesses in which valve springs and retaining washers are located. The arms are hinged so they're practically parallel at the jaws. The jaws are adjustable in width to fit the valve springs and have edges so thin that they can be easily forced under and over the ends of the valve spring to compress it.

Cylinder Hone

Cylinder Hone Tool

SKU
Description
Price
Add to Cart
32-1704
CYLINDER HONE TOOL
29.50

Fits 1-1/2" to 3" Diameter Cylinders.

Ring Compressor

Ring Compressor Tool

SKU
Description
Price
Add to Cart
32-1749
RING COMPRESSOR TOOL
13.50

For 1-1/2" to 3" Diameter Cylinders.

Ring Expander

Ring Expander Tool

SKU
Description
Price
Add to Cart
32-9052
RING EXPANDER TOOL
22.50

For installing & removing piston rings without the danger of breakage or distortion. No adjustments needed. All rings expanded whether step-cut or diagonal cut. 2" to 4" capacity.

Flywheel Tool

Briggs and Stratton
Flywheel Starter Clutch Tools

SKU
Description
Price
Add to Cart
32-1753
FLYWHEEL TOOL 3.5HP ENGINES
26.50

32-1758
FLYWHEEL TOOL 4-5HP ENGINES
26.50

32-1759
FLYWHEEL TOOL 6-7HP ENGINES
26.50

Used to remove the starter clutch and hold the flywheel.

Spark Plug Wrench

Spark Plug Wrench

SKU
Description
Price
Add to Cart
32-1291
SPARK PLUG WRENCH
4.50

Fits 13/16" Plus and 3/4" Plugs. Loosens or tightens spark plugs. It has a 13/16" wrench on one end, 3/4" on the other.

13/16

Spark Plug Wrench

SKU
Description
Price
Add to Cart
32-8976
13/16" SPARK PLUG WRENCH
4.50

Fits 13/16" and 5/8" Plugs. For Overhead Valve Engines. Loosens or tightens spark plugs. It has a 13/16" wrench on one end, 5/8" on the other.

Valve Stem Tool

Valve Stem and Core Tool

SKU
Description
Price
Add to Cart
32-9973
VALVE STEM/CORE TOOL
6.50

Used to remove and install valve stems and
cores in tubeless and tube type tires and wheels.

Safety Glasses

High Impact Safety Glasses

SKU
Description
Price
Add to Cart
33-14876
SAFETY GLASSES
12.50

Clear lens with black padded frame. Durable frame features straight temples with detachable strap. Inner foam padding is flame resistant and provides excellent sealed protection from wind, dust and other debris. Sporty, lightweight design eliminates the bulkiness of a goggle. Anti-fog lens provide 99% protection against harmful UV rays. Meets ANSI Z87.1 High Impact Requirements.

Hearing Protector

Elvex Hearing Protector

SKU
Description
Price
Add to Cart
32-9393
HEARING PROTECTOR
16.50

Noise Reduction Rating of 25 Decibels.