Manco Dingo Go Kart

WELCOME TO .... gokartsupply.com
checkered bar

We Accept

150cc Clutches

150cc Drive Belts


The Honda GY6 Engine is a small, 4-stroke internal combustion engine developed by the Honda Motor Company to power small vehicles. Honda perfected the engine design in the 1960's. Building upon that technology, a newer motor, the Honda GY6 Engine was produced in the 1980s. It's a single cylinder, air or oil cooled design that comes standard with two overhead valves. The GY6 power plant/engine has a built in swing arm with an automatic CVT transmission that's belt driven. If it's a 125cc or 150cc 4-stroke, it's typically lumped under the GY6 term. Other terms for 125cc and 150cc GY6 engines are 152QMI and 157QMJ (also QMI152 and QMJ157), respectively, and simply QMI and QMJ.

150cc Driver Clutch

Front Variator
150cc Driver Clutches

Part Number

Description

Price

Add to Cart

G6000

GY6 150CC DRIVER CLUTCH

39.95


Fits American Sportworks Model 6150, 6151, 6152, 7150 and 7151. Replaces American Sportworks Part #14374, Hammerhead Part #M150-1071000, Carter Brothers Part #5131060.

150cc Driven Pulley

150cc Driven Pulley

Part Number

Description

Price

Add to Cart

G6100

GY6 150CC DRIVEN PULLEY

49.95


Fits American Sportworks Model 6150, 6151, 6152, 7150 and 7151. Replaces American Sportworks Part #14364 and Hammerhead Part #M150-1031000.

150cc Belt 743-20

150cc Drive Belts

Part Number

Description

Price

Add to Cart

743-20

BELT FOR 150cc ENGINE

29.50


743mm (29.25") 20mm wide 30 degree angle


Premium CVT Drive Belt that works on 125cc and 150cc 4-Stroke, GY6 Engines. Used on Go Karts, ATV's, Bikes & Scooters. Drive Belt for all 150cc American Sportworks Go Karts, 150cc Hammerhead Go Karts and UTV's, 150cc Trailmaster Go Karts, Carter Brothers Talon Go Karts - Model 150 DLX, 150 FX, 150 GX, 150 GSR, 150 GSX and Yerf Dog Spider Box Go Karts. Replaces American Sportworks Part #14363 and Hammerhead Part #M150-1033000. GTS150 Belt, GTS150 Belt, GT150 Belt, GT150 Belt, SS150 Belt, R-150 Belt and GL150 Belt. UM150IIR Belt, UM150IR, LM150IR Belt, LM150IIR, UM125IIR, Junior and Standard 150 Belt.

Dimensioned as follows:

743 = Length in millimeters.
20 = Width in millimeters.
30 = Angle of the cog teeth.