Go Kart Seats

Bucket Seat with Brackets, Hardware and Seat Cover.

Fits Manco Dingo Go Kart Model 285, 286 and several other models. Back 21.25" Tall x 15.25". Bottom 15.50" wide x 11" deep. Black, Single Seat Back and Bottom. The old style seat back and bottom used to be two separate pieces. The seat bottom had a flap on each side. This is the modern replacement. Handmade in Louisiana USA.

Handmade in Louisiana USA.
Fits Dingo Go Kart Model 285, 286, 386
and others. Front and Back pictured above.

American Sportworks Go Kart Headrest Part #14402

Handmade in Louisiana USA.
Fits Manco and older American Sportworks Go Karts.

Slip cover to fit over an existing seat.
Durable material, tough flame accent.

The threaded mounting holes in the rear are 3-1/2" apart center to center. The threaded mounting hole in the front is 9-7/8" from the rear mounting holes. Thick, sturdy mounting base. Threaded inserts for a positive mount. High quality cover.

The threaded mounting holes in the rear are 3-1/2" apart center to center. The threaded mounting hole in the front is 9-7/8" from the rear mounting holes. Thick, sturdy mounting base. Threaded inserts for a positive mount. High quality cover.